五元环硫酸酯的合成及其在立体合成中的应用

五元环硫酸酯具有较高的反应活性，在有机合成中得到广泛的应用。本文将对五元环硫酸酯化合物的合成及其在有机立体合成中的应用作一综述。     

循环经济与浮法玻璃工艺的发展

在玻璃行业贯彻循环经济的理念,改进工艺思想和方法,节约资源,降低消耗,提高资源利用率,减少污染物排放,是我们对后人应负的责任和对地球应尽的义务。     

双向聚能预裂爆破切割器的研制与应用

为解决普通线性聚能切割器所用炸药等问题不能满足工程中预裂和光面爆破的要求，研究了一种双向聚能预裂爆破切割器，采用廉价的低爆速工业炸药为主装炸药，以两条高爆速炸药条带动主装炸药爆轰，使主装炸药产生聚能爆轰波，利用聚能爆轰波和聚能装药的双重聚能效果产生强烈的聚能气体或金属射流。依据这种设计思想制造出以工业炸药为主体的双向聚能预裂爆破切割器，可用于预裂、光面爆破与岩石切割等。现场试验表明，双向聚能预裂爆破切割器使用方便，爆破效果显著。     

Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

Effect of alkali and ultraviolet (UV) radiation pretreatment on physical and mechanical properties of 1,6‐hexanediol diacrylate–grafted jute yarn by UV radiation

To improve the physicomechanical properties of jute yarn, grafting with 1,6‐hexanediol diacrylate (HDDA) monomer was performed by a UV radiation technique. A series of HDDA solutions of various concentrations in methanol were prepared. A small quantity of photoinitiator (Darocur‐1664) was also added to HDDA solutions. To optimize the conditions for grafting, the effects of monomer concentration, soaking time, and radiation doses were studied by varying the number of soaking times along with variation of monomer concentrations and UV radiation intensities. The extent of polymer loading and the mechanical properties like tensile strength (TS), elongation at break (Eb), and tensile modulus of both treated and untreated jute were investigated. The highest tensile strength, polymer loading, and modulus were achieved with 5% HDDA concentration, 5 min soaking time, and the 4th pass of UV radiation. This set of conditions was selected as optimum and produced enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) over those of virgin fiber. To further improve the mechanical properties the jute yarns were pretreated with alkali (5% NaOH) solution and after that the alkali‐treated yarn were treated under UV radiation of various intensities. The pretreated samples were grafted with optimized monomer concentration (5% HDDA). Increased properties of alkali + UV‐pretreated and grafted samples such as polymer loading (12%), tensile strength (103%), elongation at break (46%), and modulus (114%) were achieved over those of virgin jute yarn. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 18–24, 2004     

基于循环自相关的NC-OFDM信号参数的盲估计

在认知无线电(CR)环境中,频率资源不足的问题越来越严重,非连续正交频分复用（NC-OFDM）能够工作在非连续的频谱环境,针对NC-OFDM信号的参数估计重要问题,提出用循环自相关的方法。该方法首先分析循环平稳信号特点,然后根据NC-OFDM信号的循环自相关在循环频率α以及时延τ切面图具有离散谱线特征进行参数估计,最后对NC-OFDM信号的循环自相关进行数值仿真。仿真结果表明在低信噪比下,能有效估计NC-OFDM信号的参数及识别零前缀的正交频分复用信号（ZP-OFDM）,且实验证明关闭近90%的子载波数目,都能够实现NC-OFDM信号的参数的盲估计。     

A203型低温氨合成催化剂使用小结

对Ａ２０３型低温氨合成催化剂的使用进行总结，介绍了该催化剂的装填，升温还原情况及使用效果。     

花岗岩残积土-土工格栅界面的后循环剪切行为研究

花岗岩残积土在华南、东南沿海、南岳、新疆等地区广泛分布,前人的研究多集中在结构性及微观特性上,后循环加载、位移演化、土壤密度等因素对筋-土界面的剪切特性及加筋作用效果的影响评估研究较少。从循环试验剪切刚度这一重要参数入手,以加载次数、加载频率值、位移振幅值、土壤重度值为自变量,应用控制变量法,通过设计循环直剪试验,得到加筋花岗岩残积土的剪切应力与剪切位移、垂直位移与剪切位移关系曲线进行观察对比,结果表明:花岗岩残积土土工格栅界面剪切刚度受位移半振幅、土壤干重度影响很大,受加载频率影响很小,循环加载并没有弱化后循环界面剪切强度,剪切位移与位移半振幅呈负相关关系。     

设抗震增强体的桩基础力学特性的原位试验研究

在过去的大地震中,许多桩基础因强烈振动和地基变形而遭受结构性破坏,因而提出一种既可以应用于新建桩基础,也可以应用于现有桩基础的抗震加固方法,即采用地基加固技术在桩基础中设置抗震增强体,以与桩基础的钢筋混凝土承台形成双层抗弯结构。采用等比例模型原位水平载荷试验和振动试验以及开挖检查等方法,对抗震加固的力学特性和构建质量进行加固前后的对比研究,进而证实了该加固方法的有效性和可行性,为同类工程起到了一定的参考意义。     

车辆荷载对浅埋大断面隧道围岩的影响研究

依托在建的甸头隧道,开展隧道开挖是否考虑初期支护下车辆荷载对围岩及大西二级公路的影响研究。结果表明:隧道开挖引起隧道顶部及腰部发生沉降,底部发生隆起,初衬的施加可以有效抑制隧道周边围岩的变形,且可减小车辆荷载对围岩位移的影响;三台阶开挖时,隧道中部开挖引起地表发生剧烈沉降,初衬的施加可以减小地表的沉降,减小车辆荷载对地表沉降的影响。因此,无初支的情况下,当公路有车辆通过时,隧道整体变形较大,路面可能由于差异沉降产生裂缝。